Sometimes windows will be stained with mineral deposits, particularly in areas with hard water. Let dry thoroughly before replacing the screens on the windows. Rinse with plain water, spray with a vinegar and water solution, then rinse again with plain water. You can also try rubbing with a soft “scrubbie” sponge (like these Scotch-Brite Non-Scratch Scrub Sponges from Amazon), but do not use steel wool or harsh scrubbing cloths these will scratch the window. For stubborn dirt and stains, including bird droppings, saturate thoroughly with vinegar and water and let stand for several minutes before drying.Alternatively, you can use a clean, lint-free towel or newspaper pages to dry the windows. Wipe the squeegee with a clean, dry towel at the bottom of each pass. Angle the squeegee towards the bottom of the window and work from top to bottom. Wipe the window dry using a clean, rubber-bladed squeegee.Spray or mop with the vinegar and water solution or with a commercial cleanser.For higher windows, use a sponge mop (or a soft cotton or microfiber mop) on a pole. Using a soft microfiber cloth, go over the surface of the window.Start by rinsing the windows with the hose, then fill a bucket with clean, cool water and add a few drops of liquid dish soap.
Outside windows typically have more dirt and stains.Keep in mind: It is best to work on a cool, cloudy day so that the soapy water and window-cleaning solution do not dry on your windows. (Dirty windows typically require two rounds of spraying and drying.) If dirt or streaks remain, spray and dry again.You also can use clean paper towels to dry the windows, if you prefer. Using a clean, lint-free towel (or the black-and-white pages of a newspaper), dry the window completely using a Z-shaped motion.
Another option is mixing one capful of ammonia with two gallons of water.
0 kommentar(er)
